Download  Print this page

Advertisement

Table of Contents
Drive Chain
Screw the pin holder until it touches the link pin.
Be sure that the cutting pin hits center of the link pin.
Screw the handlebar [A] into the body.
Turn the pin holder with the wrench [B] clockwise to ex-
tract the link pin.
Replace the link pin, link plate and grease seals.
Apply grease to the link pins [A] and grease to the seals
[B] [C].
Engage the drive chain on the engine and rear sprockets.
Insert the link pins in the drive chain ends.
Install the grease seals [C].
Install the link plate so that the mark [D] faces out.
Push the link plate by hand or plier to fix it.
In case of grease seal chain, be sure to set the grease
seals correctly.
Set the plate holder [A] and plate holder [B] on the body.
Fit the plate holder [A] to link plate.
Turn the pin holder by hand until plate holder [B] touches
the other link plate.
FINAL DRIVE 10-9

Advertisement

Table of Contents

   Also See for Kawasaki EN500 Vulcan 500 LTD

This manual is also suitable for:

Vulcan 500 ltd

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ricardo Paluan Apr 27, 2016 01:22:
    Adquiri recentemen​te uma moto vulcan 500 ano 1995. Tenho o 37 anos e iniciante no mundo motociclis​ta. Entretanto​, em razão só tempo e idade da moto, não tenho o manual do proprietá​rio, sendo este indispens