Download  Print this page

Oil Pump; Oil Pump Removal - Kawasaki EN500 Vulcan 500 LTD Service Manual

Motorcycle.
Hide thumbs

Advertisement

6-12 ENGINE LUBRICATION SYSTEM

Oil Pump

Oil Pump Removal

Drain the coolant (see Coolant Draining in the Cooling
System chapter).
Drain the engine oil (see Engine Oil Change).
Remove the engine (see Engine Removal in the Engine
Removal/Installation chapter).
Remove:
Water Pump (see Water Pump Removal in the Cooling
System chapter)
Clutch Cover (see Clutch Cover Removal in the Clutch
chapter)
Alternator Cover with Gear Change Link and Pedal (see
Alternator Rotor/Starter Clutch Removal in the Electrical
System chapter)
Chain Guide
Starter Motor (see Starter Motor Removal in the Electri-
cal System chapter)
Upper Case Mounting Bolts
Turn the engine upside down and remove the following:
Oil Pan (see Oil Pan Removal)
Oil Screen Bolts [A]
Oil Screen [B]
Oil Pump Outer Oil Pipe Bolt [A]
Oil Pump Outer Oil Pipe [B]
Lower Case Mounting Bolts
Lower Case
Remove the circlip [A] that holds the oil pump gear [B] on
the oil pump shaft [C].
Remove the oil pump gear.
Take off the oil pump mounting screws [D].
Remove the oil pump from the lower case.

Advertisement

Table of Contents

   Also See for Kawasaki EN500 Vulcan 500 LTD

This manual is also suitable for:

Vulcan 500 ltd

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ricardo Paluan Apr 27, 2016 01:22:
    Adquiri recentemen​te uma moto vulcan 500 ano 1995. Tenho o 37 anos e iniciante no mundo motociclis​ta. Entretanto​, em razão só tempo e idade da moto, não tenho o manual do proprietá​rio, sendo este indispens