Download  Print this page

Clutch Release Installation; Clutch - Kawasaki EN500 Vulcan 500 LTD Service Manual

Motorcycle.
Hide thumbs

Advertisement

Right Engine Cover

Clutch Release Installation

Always install a new oil seal when the clutch release
shaft is removed.
Apply high temperature grease to the oil seal lips in the
clutch cover.
Apply oil to the bearings in the hole of the clutch cover.
Apply oil to the release shaft.
Turning the release lever toward the rear, insert the re-
lease shaft straight into the hole of the clutch cover.
When inserting the release shaft, be careful not to
remove the spring of the oil seal.
Install the clutch inner cable tip in the release lever.
Turn the release lever clockwise until it becomes hard to
turn.
The release lever should have proper clearance and an-
gle as shown.
[A] 1 ∼ 3 mm (0.04 ∼ 0.12 in.)
[B] 80° ∼ 90°
CAUTION
CAUTION

CLUTCH 5-9

Advertisement

Table of Contents

   Also See for Kawasaki EN500 Vulcan 500 LTD

This manual is also suitable for:

Vulcan 500 ltd

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ricardo Paluan Apr 27, 2016 01:22:
    Adquiri recentemen​te uma moto vulcan 500 ano 1995. Tenho o 37 anos e iniciante no mundo motociclis​ta. Entretanto​, em razão só tempo e idade da moto, não tenho o manual do proprietá​rio, sendo este indispens