Copy Options; Paper Type; Paper Size - Brother MFC-J200 Basic User's Manual

Chapter 8

Copy options

When you want to quickly change the copy
settings temporarily for the next copy, use the
Copy Options key.
The machine returns to its default settings
one minute after it finishes copying, or if the
mode timer returns the machine to Fax mode.
(See Advanced User's Guide: Mode Timer
(MFC models only).)
(Basic User's Guide)
For information about changing the following
copy settings, see page 48.


Paper Type



Paper Size

(Advanced User's Guide)
For information about changing the following
copy settings, see Advanced User's Guide:
Copy options.

Quality

Enlarge/Reduce

Page Layout

2in1(ID)

Stack/Sort

Density

Remove Bkg. Clr
NOTE
If you want to sort copies, use the ADF.
48
Paper Type
8
If you are copying on a special type of paper,
set the machine for the type of paper you are
using to get the best print quality.
a
Load your document.
b
Press
c
Enter the number of copies you want.
d
Press Copy Options and a or b to
choose Paper Type.
Press OK.
e
Press a or b to choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency.
Press OK.
f
If you do not want to change any further
settings, press Mono Start or
Colour Start.
Paper Size
If you are copying on paper other than A4
size, you will need to change the Paper Size
setting. You can copy only on A4, A5,
Photo (10  15 cm), Letter or Legal
a
Load your document.
b
Press
c
Enter the number of copies you want.
d
Press Copy Options and a or b to
choose Paper Size.
Press OK.
e
Press a or b to choose A4, A5,
10(W)x15(H)cm, Letter or Legal
Press OK.
f
If you do not want to change any further
settings, press Mono Start or
Colour Start.
1
Only available for some countries.
(COPY).
1
paper.
(COPY).
8
8
1
.