FoodSaver V3240 User Manual page 6

How to
Make a Bag from a FoodSaver
1. Open appliance door and place roll into
Roll Storage Compartment (Fig. 1).
For Best results, insert roll with material flap down.
Note: Bags can be sealed with appliance door either
open or closed.
2. Lift up Bag Cutter Bar and place bag material
beneath the Cutter Bar (Fig. 2).
3. Pull out enough bag material to hold item
being vacuum packed, plus 3 inches (7.6cm).
Lower the Cutter Bar and slide Bag Cutter across
the Cutter Bar (Fig. 3).
4. Lift Bar, place bag over sealing strip, gently
lower bar, press Seal button. Once red light
goes off, lift bar and remove bag (Fig. 4).
5. You now have one sealed end (Fig. 5).
6. Now you are ready to vacuum seal with your
new bag (see next page).
5
®
www.foodsaver.ca 1-877-804-5383
Vacuum Sealing Roll
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
3"