Professional wireless weather station with wind and rain (10 pages)
Summary of Contents for AcuRite 1602RX
Page 1
IMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE PRODUCT REGISTRATION Register online to receive 1 year warranty protection www.AcuRite.com ► Register a Product Questions? Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com. SAVE THIS MANUAL FOR FUTURE REFERENCE.
Page 3
1. Peak Wind Speed 19. Record Low Highest speed from past 60 minutes. Shown for current category selected on the display (#15). 2. Wind Speed Alarm On Indicator 20. Clear Button 3. Average Wind Speed Deletes record low (#19) shown. of all speeds from past 2 minutes.
Back of Display Unit BACK OF DISPLAY UNIT 5. Clear Today Clears data recorded since 12:00am. 1. Backlight Dimmer Switch 6. Reset Adjusts display backlight settings: Full reset to factory defaults. Off, low, medium, high 7. Clear All 2. Integrated Hang Hole Clears all data recorded.
Display Unit Setup The display unit operates with batteries and/or power adapter. Regardless of the power source, it is recommended that batteries always be installed to ensure continuous operation (and retain records) in case of a power outage. Set the A-B-C Switch Install or Replace Backup Batteries (optional) The A-B-C switch is located inside...
Set the Time & Date The clock and calendar are utilized to time stamp history records and other data, so it is important to set the time and date soon after you power on the display unit. Set the Time 1.
6. Press the “ ” button to confirm your selection. Units are now set. Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust.
LIKELY MIX LIKELY (flashing=stormy) (flashing=stormy) View the complete list of icons at www.AcuRite.com/acurite-icons Barometric Pressure Subtle variations in barometric pressure greatly affect the weather. This weath- er forecaster displays the current pressure, direction it’s trending (FALLING, STEADY, or RISING) and a pressure chart. The chart tracks and displays the change in pressure so you can monitor the rate of change over time.
Page 9
Set a Weather Alarm 1. Choose the weather category for which you wish to set an alarm by pressing the up or down arrow buttons until the category is displayed on the Selectable Category part of the display unit. 2. To program a value (only applies to alarms that require a value), press AND HOLD the “...
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Calibration Calibrate Temperature & Humidity The indoor / outdoor temperature and humidity readings can be calibrated on the display unit to improve accuracy.
If your AcuRite product does not operate properly, visit www.AcuRite.com or call (877) 221-1252 for assistance. For more information, visit our Knowledge Base at http://www.AcuRite.com/kbase FCC Information This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation.