5.1 Functions menù
5.1.1 User management
This function can be accessed by the Administrator only.
To modify the users' access rights select "Functions
Through the combo-box select the user name whose rights have to be modified. Set the check-boxes below
accordingly to the user's access rights. By default, all check-boxes are unselected and all the users have read only
The users can be enabled to the following functions:
Write Access: modification of the parameters of connected device.
Commands: commands to the connected device.
Test: test operations to the connected device.
Disable device: selection of the devices that can be accessed by the user.
From the toolbar the following actions can be selected:
The "Change user settings" button is available to modify the user name.
Figure 11. "User manager" page
: the previous page is returned without saving any changes; the user is warned the changes
have not been saved and is given the chance to save them.
: the changes are saved.
: the changes are canceled.
User Manager": the following page will appear: