Everstar MPK-10CR Use & Care Manual page 12

Auto-Timer Instructions
NOTE:
The AUTO-TIMER feature offers a unique selection of multiple choice, fully automatic on/off (start / stop)
programs between 0-24 hrs under any one mode of your portable unit.
The programs are as follows:
a) Auto-off:
Please be aware that in order for the (Auto - Off) function to work properly, the unit must be operating (On
Position).
Pre-select a specified time (between 0-24hrs) for the unit to remain operating. At the end of the selected
duration unit will turn off automatically. This function must be performed daily as the program is auto-
matically cancelled / erased upon completion of the function or if the unit should be unplugged.
b) Auto-On:
Please be aware that in order for the (Auto - On) function to work properly, the unit must be operating (Off
Position).
Pre-select a specified time (between 0-24hrs) to start the operation of the unit. At the end of the selected
duration unit will turn on automatically. This function must be performed daily as the program is auto-
matically cancelled / erased upon completion of the function or if the unit should be unplugged.
c) Auto-On & Auto-off:
Pre-select a time that will turn on and turn off the unit (automatically) at specified times (between 0-24 hrs).
This program does not contain built-in memory. Any interruption to the electrical power supply of the unit
will automatically cancels / erases all auto timed programs. In the event this should happen, you will be
required to re-set your program.
Setting the AUTO-ON TIMER
Before setting the AUTO-ON timer, you must select the appropriate MODE and settings (FAN SPEED,
TEMP, etc.)
1) Turn the unit "on"(
2) Select the appropriate MODE under which you want the unit to operate (Cool-Dry
3) Select the appropriate FAN SPEED setting, under which you want the unit to operate.
(High, Med, Low) (excluding Dehumidifying, as this mode just has"1" fan speed setting only)
Fig.20.
4) All of the settings are now registered. TURN THE UNIT "OFF" USING THE
5) To set the AUTO-ON timer, the unit must be turned to the "off" position (non-operational).
switch).
Fig. 19
Operation Mode
11
-Fan ) Fig.19.
SWITCH.
Fig. 20
Fan Speed