You must first start system administration in order to ac-
tivate some of the call detail recording functions.
You can start either "US:User Options UK:System ad-
min.-User." or "US:Systemadmin. charging UK:System
admin.-Charges", depending on your class of service
(which is defined by the service technician).
Starting system administration:
Press the key. The LED lights up.
Select and confirm.
Enter the code.
Enter user name.
The service technician can change the user name
for "US:User Options UK:System admin.-User" =
95" = default.
The service technician defines the user name for
"US:Systemadmin. charging UK:System admin.-
Charges" and notifies you of it.
Confirm your entry.
(Necessary only if you or the service technician defined
If you are starting system administration for the
first time, do not enter a password. Just press
ception: You should enter a password only if your
service technician has already set one up for you.
The system prompts you to enter a password (up
to sixteen characters), but this is not obligatory.
In either case, press
Once you have entered your password, you must
enter it again.
Please make a note of your password, because
not even your service technician can determine
the password later on.
Confirm your entry even if you did not enter a pass-
System administration is started and the available func-
tions appear on the screen.
to accept the Identification prompt. Ex-