Section 3: Programming The 7845Gsm; General Information; Using The Alarmnet Direct Website - Honeywell AlarmNet 7845GSM Installation And Setup Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
o

General Information

o
ECP Mode Programming
o
Alternative Modes (Zone Trigger, 4204 and
Two-4204)
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
General Information
The 7845GSM is designed to deliver alarms via the GSM network to an AlarmNet central
station when it is registered with a valid AlarmNet account.
The 7845GSM module requires an AlarmNet–I account. For new installations, please obtain the
account information from the central station prior to programming this module. For replacement
installations, the AlarmNet-I account is created automatically when the module is registered (based on
the existing "C Series" account).
You can program a 7845GSM by one of the following methods:
• Through the AlarmNet Direct website
• Through use of a 7720P Programming Tool
• Through a programming mode in the control panel on panels that support this option
(e.g., VISTA-128BP and FBP)

Using the AlarmNet Direct website

To program the module via the website (if you are already signed up for this service), go to:
https://services.alarmnet.com/AlarmNetDirect/userlogin.aspx
If you are not signed up for this service, click on "Dealer Sign-Up.
Log in and follow the on-screen prompts.
Please have the following information available when programming the module:
1. Primary City ID (two-digit number)
2. Primary Central Station ID (two-digit hexadecimal number)
3. Primary Subscriber ID (four-digit number)
4. MAC ID and MAC CRC number (located on the outside of box and on label inside
module) or MIN number of the device you are replacing
5. Mode of operation of existing module if replacing a "C" series radio.
After programming is complete, you must transfer the data to the module and the module
must be registered. Refer to Section 4: Registration, for further instructions.
WWW.DIYALARMFORUM.COM
Programming the 7845GSM
WWW.DIYALARMFORUM.COM
o
Alternative Mode Programming
o
Exiting Programming Mode
S E C T I O N 3
3-1