Pioneer VSX-49TX Service Manual page 179

BASS & TREBLE buttons
Use to choose the high or low frequencies to
adjust.
(+/–) buttons
Use to adjust the high and low frequencies,
effect level and channel level.
5 SYSTEM SET UP button
Use to set up the speaker and sound systems. For
more information see "Setting up for Surround
Sound" .
6 5˜∞˜2˜3˜ENTER buttons
These buttons can be used for a variety of
operations. In the SYSTEM SETUP menu, the
5˜∞ buttons can be used to adjust CHANNEL
DELAY or CHANNEL LEVEL.
These buttons are also used to control the DVD
menu for the DVD remote control screen.
7 STATUS button
Use to display the present mode the receiver is
in and another settings.
8 Command button for other components
Use these buttons to control other components
you selected with the MULTI CONTROL
buttons. You must input the preset code in
order use this function .
9 TV CONTROL buttons
The following buttons are used to control the TV
only and can be used once they are preset to
control your TV.
TV INPUT : Press TV INPUT to select the TV for
remote control operation.
TV CH +/– : Use these buttons to change the
channel of the TV.
TV VOL +/– : Press to control the volume of the
TV.
0 LISTENING MODE buttons
THX : Press to put the receiver into THX sound
mode .
STANDARD : Press to put the receiver into
STANDARD sound mode .
STEREO/DIRECT : Switches the receiver into
STEREO mode if it was in a different sound
mode or toggles between DIRECT and STEREO
mode.
ADVANCED CINEMA : Press to put the
receiver into ADVANCED CINEMA sound
mode.
ADVANCED CONCERT : Press to put the
receiver into ADVANCED CONCERT: sound
mode .
- ACOUSTIC CAL. button
Press to switch on/off the acoustic calibration
function.
= MULTI CH INPUT button
Use to hook up an external component that can
decode other types of signals and input them
into the VSX-47TX.
VSX-49TX, VSX-47TX
~ LISTENING CH SELECT.
Use this button to select a listening channel to
add or subtract the amount of effect applied in
Advanced Theater or other Listening modes.
! SYSTEM OFF button
This button turns off components in two ways.
First, when pressed it will turn off all PIONEER
components. Secondly, any component that
has programmed into the SYSTEM OFF
settings will be turned off.
For example : If you programmed power off in
the SYSTEM OFF settings for your TV and VCR,
pressing the SYSTEM OFF button will turn off
these components even if they are not PIO-
NEER products.
@
RECEIVER (standby/power on) button
Press to turn power of the receiver on or to
standby (off).
# MULTI OPERATION button
Use this button to start the MULTI OPERATION
mode. for how to program and use the MULTI
OPERATION mode.
$ RECEIVER button
Use this button to switch the remote control
into receiver mode in order ot get certain
receiver functinos or do receiver setups .
% REMOTE SETUP button.
Use to customize the remote control functions
and the remote control itself. (See "Setting Up
Remote Control of Other Components" .
^ EXIT button
& INPUT button
Press to select an input source. The button will
cycle through all the possible sources.
* VOLUME (+/–) buttons
Use to raise or lower the volume of the receiver.
( MIDNIGHT button
Switches the MIDNIGHT listening mode on or
off (for all modes except THX and MULTI CH
IN).
DIGITAL NR button
Switches the DIGITAL NR on or off (for all
modes except THX and MULTI CH IN).
) MUTE button
Press to mute or restore the volume.
_ LIGHT button
Use to light the remote control screen.
179