Primary Master Submenu Options - Fujitsu Stylistic ST5000 Series Technical Reference Manual

Tablet pc
Hide thumbs Also See for Stylistic ST5000 Series:
Table of Contents

Advertisement

Primary Master Submenu Options

Options and settings for the Primary Master Submenu are given in Table 2-2.
F1
Help
ESC
Exit
Option
Note: the following settings reflect the fields when Auto is selected as the type. If Hard Disk or CD-ROM are selected,
additional objects are displayed, such as Cylinders and Heads.
Type:
Total Sectors:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
PhoenixBIOS Setup Utility
Exit Submenu
Primary Master [FUJITSU MHT2060AT-(PM)]
Type:
[Auto]
LBA Format
Total Sectors:
117210240
Maximum Capacity:
60012MB
Multi-Sector Transfers:
[16 Sectors]
LBA Mode Control:
[Enabled]
Transfer Mode:
[Multiword DMA 2]
Ultra DMA Mode:
[Mode 5]
Select Item
Select Menu
Table 2-2. BIOS Setup Primary Master Configuration Options
Settings
Auto
None
CD-ROM
Hard Disk
___
xxxxMB
16 Sectors
Enabled
Multiword DMA 2
Disabled
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
-
Change Values
Space
Enter
Select
Sub-Menu
Select [Auto] to load configuration parameters from the hard drive
automatically. Selecting CD-ROM or Hard Disk allows you to
change the parameters of the selected drive. Selecting [None]
disables the hard drive.
Display only.
Display only.
Display only.
Display only.
Display only.
Display only.
F9
Setup Defaults
F10
Save and Exit
Description
BIOS Setup Utility
2
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents