Kenmore Electric Wall Oven Installation Instructions Manual page 7

KENMORE ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
6.For typical under counter installation of an electric built-in oven see Figure below.
Only certain cooktop models may be installed over cer-
tain built-in electric oven models. Approved cooktops
and built-in ovens are listed by the MFG ID number and
product code (see the insert sheet included in the litera-
ture package and cooktop installation instructions for the
dimensions).
To reduce the risk of
personal injury and
tipping of the wall
oven, the wall oven
must be secured to
the cabinet (s) by
mounting brackets.
208/240 Volt junction box
for built-in oven.
Figure 9 - TYPICAL UNDER COUNTER INSTALLATION OF A SINGLE ELECTRIC BUILT-IN OVEN
(and Optional Electric or Gas Cooktop Combination)
Approx. 3"
(7.5 cm)
G
4-1/2" (11.5 cm) Max. distance*
* If no cooktop is installed directly over
the oven unit, 5" (12.7 cm) maximum
is allowed above the floor.
30" (76.2 cm)
Wall Oven
WITH AN ELECTRIC COOKTOP MOUNTED ABOVE
Cabinet side filler panels are
necessary to isolate the unit
from adjoining cabinets. Cabinet
side filler height should allow for
installation of approved cooktop
models
F
Use 3/4" (1.9 cm) plywood, installed
on two runners, flush with toe plate.
Base must be capable of supporting
200 pounds (90 kg).
Cut an opening in wood base minimum 9" x 9"
(23 X 23 cm), 2" (5 cm) from left side filler
panel, to route armoured cable to junction box.
CUTOUT DIMENSIONS
F.WIDTH G.DEPTH
28½" (72.4 cm) Min.
23½" (59.7 cm) Min.
29" (73.7 cm) Max.
7
36" Min.
(91.4 cm) Min.
H
H.HEIGHT
27¼" (69.2 cm) Min.
28½" (72.4 cm) Max.