Step 5: Set Up Windows; Using The Documentation Library Cd - HP Notebook pc Startup Manual

Using the Documentation Library CD

Getting Started with Your Notebook
Using the Documentation Library CD

Step 5: Set up Windows

Your notebook has the Microsoft Windows operating system preinstalled on its hard
drive. The first time you turn on your notebook, the Windows Setup program runs
automatically so you can customize your setup.
1. Follow the Setup program instructions on the screen. If the program prompts you
to enter the Product ID code, locate the code on the bottom of the notebook.
2. Check the modem country or region settings. Select Start > Control Panel >
Printers and Other Hardware > Phone and Modem Options, then choose your
country or region.
Information about using the notebook can be found on the Documentation Library
CD included with the notebook. When you insert the Documentation Library CD
into a CD or DVD drive, the CD menu appears on the screen after a brief pause. Or
you can display the menu manually:
1. Select Start > Run.
2. In the Open field, type
drive). Select OK.
3. From the list that appears, select the file with the .exe extension (for example,
Filename.exe).
The application launches.
Using Acrobat Reader
Adobe Acrobat Reader is the application used to display the notebook
documentation. If you see Adobe Acrobat messages when you install the
Documentation Library CD:
•
Choose to install Acrobat Reader.
•
When prompted, choose to accept the Acrobat Reader license agreement.
14 Startup Guide
: (where is the letter of the CD/DVD
explorer