Getting Started
Step 1: Mount the nüvi
1. Plug the vehicle power cable into the
power connector on the right side of
the cradle.
Cradle
2. Remove the clear plastic from the
suction cup. Clean and dry your
windshield and the suction cup with a
lint-free cloth.
3. Place the suction cup on the
windshield.
4. Flip the lever back, toward the
windshield.
Suction cup mount
Vehicle power
cable
5. Snap the cradle onto the suction cup
arm.
6. Fit the bottom of your nüvi into the
cradle.
7. Tilt the nüvi back until it snaps into
place.
8. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
9. If you are using a traffic receiver in
Europe, secure the antenna on the
traffic receiver to the windshield using
the suction cups. (The traffic receiver
is included in some nüvi packages.)
nüvi 705 Series Owner's Manual