Program Keys - Honeywell LYNX Touch SIA Manual

Screen Display
Response Type
Not Used
Report
Yes
Chime
No
Supervision
Supervised

Program Keys

Keys
Key Type
4 Button Key
User
Serial Number
0
Zone
49
Function & Programming Options
Response Type
Choose from the following options (dependant upon the Device Type):
Not Used
Entry Exit 1
Entry Exit 2
Interior Follower
24 Hour Silent
24 Hour Auxiliary
Interior With Delay
Carbon Monoxide
Report
Yes
No
Chime
Yes
No
Supervision
Hardwire Zone RF Zone
Normal Open Supervised
Normal Closed Unsupervised
End of Line
Keys
Select from the following options:
Edit Add New
If add new is selected the following options can be programmed:
Key Type
Serial Number
Button Key 1 – Zn 49
Button Key 3 – Zn 51
Button Key 5 – Zn 53
Button Key 7 – Zn 55
Key Type
1 Button Key.
2 Button Key
4 Button Key
6 Button Key
8 Button Key
User
Master
Duress
Babysitter
User 3 through User 14
Note: The Key must be associated with a specific User/User Code in order for it to operate. Refer to the
LYNX Touch Series User Guide for additional Information regarding User Codes.
Serial Number
When "Serial Number" has been selected "Enter Serial Number or Activate" is displayed.
The transmitter serial number and loop number can be enrolled via RF transmission OR
manually.
Enroll via RF Learning To enroll the device using RF Learning mode three transmissions
(open/close) of the device will be required. The initial transmission activates the RF
Learning mode. A second transmission enrolls the serial number and the system beeps two
times and displays "Activate Sensor Again To Confirm". A third transmission will confirm the
serial number. The system beeps two times and returns to the Zone programming Screen.
Enroll Manually
Enter the 7-digit serial number printed on the transmitter using the displayed keypad and
select "Done". The system beeps one time and returns to the Zone programming Screen
Zone
Manually enter a specific two-digit Zone Number (49-64).
Arm Stay
Disarm
Silent Burglary
Resident Response
General Response
Perimeter
Day Night
24 Hour Audible
Temperature
High Temp
Low Temp
Delete
User
Zone
Button Key 2 – Zn 50
Button Key 4 – Zn 52
Button Key 6 – Zn 54
Button Key 8 – Zn 56
- 8 -
Fire No Verification
Monitor
Trouble
Arm Away
No Response
Resident Monitor
General Monitor
Fire With Verification