Motorola RNG200N Quick Start Manual page 12

Hd dual tuner dvr
Hide thumbs Also See for RNG200N:
Table of Contents

Advertisement

Troubleshooting
Problem — If this occurs:
There is no audio
from the center and/or
surround speakers of a
home theater receiver
connected to the
set-top
There is no video on the
TV screen
No graphics or
program guides appear
on the TV screen
RNG200N Quick Start Guide
Solution — Then do one of the following:
• Not all Dolby Digital programs feature full 5.1 surround sound. In some cases, the programs may only contain
left and right stereo audio.
• Verify that the S/PDIF cable (coaxial or optical) is fi rmly connected to the set-top and the home theater
receiver.
• Verify that the home theater receiver is set to a surround sound audio mode (Dolby Digital, Dolby Pro Logic II,
Dolby Pro Logic).
• Verify that the receiver is properly confi gured to work with all connected speakers.
• Verify that the TV is powered on and set to the appropriate input source for the set-top.
• Verify that the set-top is powered on and tuned to an authorized cable channel.
• Verify that all video cables between the set-top and the TV are fi rmly connected.
• Verify that the coaxial cable feed is fi rmly connected to the set-top and the wall jack.
• If the set-top video output is connected to a home theater unit, verify that the home theater unit is powered
on and set to the appropriate input source.
• If the set-top video output is connected to a TV through an HDMI connection, power off the TV and then
power off the set-top. Wait one second and then power on the devices.
• Not all HDTVs can display every output format (1080i, 1080p, 720p, 480p, or 480i) available on the set-top. To
select a different format:
1.
Ensure that your set-top is plugged into a power outlet and is turned off.
2.
Ensure the TV is turned on and tuned to the appropriate channel for the set-top.
3.
Press the MENU key on the front panel. Your settings are displayed on the set-top front panel display.
Use the ▲ and ▼ keys on the front panel to display the HDMI/YPbPr OUTPUT setting.
4.
Press the ► key to cycle through the available output formats until a picture displays on the TV.
5.
If you use the IEEE-1394 connection, on-screen graphics, including closed captions and program guides, are
not displayed by the set-top. On-screen graphics and captions may still be overlaid by your TV, if enabled.
Alternatively, use HDMI or component video instead.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents