Performance Check - Furuno FS-1575 Installation Manual

Ssb radiotelephone
Hide thumbs Also See for FS-1575:
Table of Contents

Advertisement

3. INITIAL SETTINGS
2. Enter the password. The lock icon turns green, the shackle of the lock
opens and the cursor selects the MMSI area. Push the Rotary knob to
show the MMSI input box.
3. Use the numeric keys to enter the MMSI.
4. Push the Rotary knob to register the MMSI.
Note: You can re-enter the MMSI if it is wrong. Select
are asked "MMSI Clear OK?". Select [Yes] then push the Rotary knob. Select the MMSI number
input area then push the Rotary knob. Enter the MMSI.
3.3

Performance Check

Power the system and check the receiver and transmitter as follows:
Receiver
1. Set the unit as follows:
Speaker: ON, Squelch: OFF, AGC: Fast, Gain: Maximum
2. Confirm that a signal can be received on each band. If noise is present or a signal is weak,
check the antenna lead-in section, coaxial cable and ground.
Transmitter
1. On each band, confirm that the antenna is tuned when the 0/TUNE key is pressed. If "tuning
error" appears, check the antenna (connection, ground, etc.).
2. Communicate with the handset. Confirm that IA and IC change with voice level.
[CLEAR] then push the Rotary knob. You
33
MMSI input box

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-2575Fs-5075

Table of Contents