Schedule Timer - Sanyo SHA TM64 AGB Instruction Manual

Schedule Timer

Schedule Timer / SHA-TM64AGB
Operation Buttons
A: PROGRAM button
B: PROG. COPY buttons
C: CLEAR button
D: Setting buttons
A: PROGRAM button
B: PROG. COPY buttons
C: CLEAR button
D: Setting buttons
E: HOLIDAY button
F: CANCEL button
G: TIMER OFF button
Use to start setting programs and to enter program settings.
Use to copy programs to groups or specific days in a schedule.
Press to clear the settings of the currently displayed program.
The current program is not cleared unless the
•
the CLEAR button.
Use to make program settings and to set the present time.
Press to set groups for programmed operation.
Press to set today's day and days of programmed operation.
Press to set the present time and times used in programmed operation.
Use to start/stop indoor units via the timer.
Use to enable/disable remote controller operation via the timer.
Use to set programmed operation trigger time.
• Program settings are not entered unless the
setting operations.
Press to set and cancel holidays during a scheduled week of operation.
Press to cancel the current program setting operation, copying operation or holiday setting
operation. When the CANCEL button is held down for 2 seconds, the current setting
operation or copying operation is canceled and the normal display returns.
Press to turn the timer OFF when timer operation will not be used for a long period of time.
When this button is held down for 2 seconds,
cannot be run until the button is again held down for 2 seconds.
Some of the above features are disabled when the unit is installed. If the button of a
disabled feature is pressed,
your dealer.
E: HOLIDAY button
F: CANCEL button
G: TIMER OFF button
button is pressed after pressing
button is pressed at the end of
appears on the display. Programs
appears on the display. For more information, contact
3