Sanyo SHA TM64 AGB Instruction Manual page 11

Schedule Timer
STEP 4 Press the SET button to copy.
Press the SET button and the program schedule marker
will be displayed.
STEP 5 Select other copy destination days if desired.
You can copy the selected source day program into other days
by repeatedly pressing the DAY button to select a day of the
week followed by the SET button to set it.
NOTE
Pressing the CLEAR button extinguishes the program schedule
marker
3
STEP 6 Press the PROG. COPY DAY button to enter the copied pro-
gram in the selected days.
The normal display returns.
NOTE
If a program already exists in the copy destination day, the newly copied program overwrites the existing program.
If you accidentally copy over a program in the day program copy mode, holding down the CANCEL button for more
than 2 seconds returns the program to the point prior to pressing the PROG. COPY DAY button in STEP 1. (All
changes and copy operations made up until that point are cleared.)
and cancels the copy operation.
.