Sanyo SHA TM64 AGB Instruction Manual page 10

Schedule Timer
How to Copy Program Times
You can copy the already set program of one day into another day (Day Program Copying), as well as copy the week pro-
grammed for one group into another group (Group Program Copying).
Example of Day Program Copying
(Copying Monday's program into Tuesday)
How to Copy Day Programs
STEP 1 Press the PROG. COPY DAY button.
The group No. and the
"CP-1" starts blinking in the present time display area. In this
state, select a group in which to copy day programs, using the
GROUP button.
STEP 2 Select a source day program to copy.
Every time the DAY button is pressed, the
days of the week display, therefore select a day of the week that
will serve as the copy source.
Once having selected the copy source day, press the SET button
to set it. The display changes to key you to select a copy destina-
tion day.
STEP 3 Select a copy destination day.
When the schedule timer is ready for you to select a copy des-
tination day, "CP-2" starts blinking in the present time display
area, while the selected copy source day blinks in the days of the
week.
Therefore, select a day of the week as the copy destination, us-
ing the DAY button.
Example of Group Program Copying
(Copying group No. 1's program into group No. 2)
over today's day start blinking and
moves across the
3