Table of Contents
Advertisement
MODEL: WD-Y57 / WD-Y65 / WD-57732 / WD-65732 / WD-73732
57" & 65" Engine (xHD5) Removal from cabinet
57" & 65" Engine Removal from base plate
Removing the xHD5
Engine from the Plate
1) Remove the 2 screws
(a), and 4 screws (b).
2) Carefully lift the
engine from the base
plate.
After Replacing Engine
Copy Engine Data to DM
Refer to data transfer on page 32.
NOTE:
After Engine replacement, verify the foam gasket around the lens is properly positioned and that it does not block
the light path. The side portholes of the cabinet can be used for visual confirmation. The protholes can also be used to clean
the lens, mirror and screen.
Engine Removal
xHD5 Engine Removal Procedure
Page 12
1) Remove 2 locking screws (b).
2) Loosen one adjust screws (a). Less
adjustment will be required when the
Engine is installed.
3) Disconnect all leads to the Engine,
Lamp Box and Ballast.
4) Carefully slide the Engine, with the
bottom plate from the cabinet.
Hide quick links:
Advertisement
Table of Contents
