Cleaning And Maintenance; Protecting The Environment - Black & Decker Powerful Solutions BR925L Original Instructions Manual

ENGLISH
Switch the boiler on/off switch (11)

off. The light in the switch will
go off.
Continue ironing until all the steam

has been released.
Switch the iron on/off switch (9)

off. The light in the switch will go off.
Unplug the appliance.

Carefully unscrew slightly but do not

remove the boiler filler cap (7).
Wait until the hissing of the residual

steam has stopped and remove the
boiler filler cap (7) very carefully,
taking care as the steam and the
boiler filler cap (7) can be very hot
and could cause burns or scalding.
Use the filler jug (6) and slowly and

carefully fill the boiler with water.
Fit the boiler filler cap (7), tightening

well.
Instructions for dry ironing
For dry ironing (without steam), plug

in the appliance and Switch the iron
on/off switch (9)
in the switch will come on.
Regulate the temperature by

adjusting the thermostat knob (5) for
the fabric to be ironed.
Fabric chart

Cleaning and maintenance

Warning! Switch the appliance off and
unplug it before cleaning or maintenance.
8
to on. The light
Acetate
acrylic
nylon
polyester
rayon
Silk
Wool
cotton
fine linen
Cotton
Linen
starched clothes
Occasionally rinse the boiler with tap
water until it runs clear. Do not use
chemical additives.
Mains plug replacement (U.K. &
Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.

Connect the brown lead to the live

terminal in the new plug.
Connect the blue lead to the neutral

terminal.
Connect the green/yellow lead to the

earth terminal.
Warning! Follow the fitting instructions
supplied with good quality plugs.
Recommended fuse: 13 A.

Protecting the environment

Separate collection. This
product must not be disposed of
with normal household waste.
Should you find one day that your
appliance needs replacement, or if it is of
no further use to you, think of the
protection of the environment. Black &
Decker repair agents will accept old Black
& Decker tools and ensure that they are
disposed of in an environmentally safe
way.
Separate collection of used
products and packaging allows
materials to be recycled and
used again. Re-use of recycled
materials helps prevent
environmental pollution and
reduces the demand for raw
materials.
Local regulations may provide for
separate collection of electrical products
from the household, at municipal waste
sites or by the retailer when you purchase
a new product.
Black & Decker provides a facility for the
collection and recycling of Black & Decker
products once they have reached the end
of their working life. To take advantage of
this service please return your product to