Acer V173 Service Manual page 58

Assemble front bezel
Fix mainboard
Fix chassis
&poweboard
Assembly and Disassembly continue)
1.Reverse the panel by 180 degree,put
the surface of panel upsides and insert
front bezel in the panel.
2.Reverse the panel by 180 degree using
both hands,put the surface of panel
downsides and make sure FFC interface
is closer to operator.
3.Paste tinfoil on the position which refers
to attached picture,in order to cover the
gap in the panel completely.
Remark:Make sure the fixed job is
finished properly and lamp wire is closer
to right hand;Make the tinfoil smooth in
the corner of panel.
(1).Insert FFC wire into its relevant
interface of mainboard properly like
attached picture1.
(2).Insert the short keypad into its
relevant interface like picture1.
(2).Put the fixed mainboard in the right
position.
Place the chassis on the cushion after
check,like the attached Picture1.
57
ASSY, BEZEL,V,GRAY
714030015900R
SILVER,LE17J0
PCBA,I/F
791421300610R
BOARD(VC,EMEA),LE17
J0-622 ROHS
ASSY,CHASSIS,B,W/
701000007400R
DVI , LE17K0(VC)