Table of Contents
Advertisement
2
STEP
Channel reception settings and TV aspect settings
2
3, 4
1
Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2
Press [ ^ ] to turn the unit on.
When the Download from TV screen appears (➡ right)
Auto Tuning setting screen appears.
Auto Tuning starts.
The unit will search for the terrestrial digital channels. TV
channels will be located and stored ready for use.
This takes 3 minutes.
Auto Tuning-Digital (DVB)
Scan
21
This will take about 3 minutes.
CH
Channel Name
1
TV ONE
2
TV 2
Free TV: 2
Pay TV: 0
Radio: 0
RETURN
Auto Tuning is complete when Power Save setting screen
appears.
The time information can be obtained.
3
Press [ e , r ] to select "On" or "Off"
and press [OK].
Power Save
On
Off
On: Minimises standby power consumption,
disables Quick Start function. Unit's Display
is set to "Automatic".
Off: Enables Quick Start function.
OK
RETURN
On:
It will go into the Power Save mode when the power is
turned off.
Off:
It is possible to start quickly from standby mode.
The features of the power save function when the unit is in
standby mode are as follows.
Power Save
Power consumption
Start up time
RQT9433
18
TV
VOL
DRIVE
CH
SELECT
AV
PAGE
1
2
3
abc
def
CH
4
5
6
ghi
jkl
mno
7
p
8
9
w
qrs
tuv
xyz
0
MANUAL SKIP
INPUT
DEL
SELECT
SKIP
SLOW/SEARCH
STOP
PAUSE
PLAY/x1.3
STATUS
EXIT
OK
OPTION
RETURN
RETURN
CREATE
CHAPTER
REC
REC MODE
TIME SLIP
PROG/CHECK
TEXT
STTL
AUDIO
DISPLAY
6
9
Type
Quality
DVB
10
DVB
10
Data: 0
Searching
On
1
Approx. 0.7 W
Approx. 10 W
Not Quick
Quick
"Unit's Display" is fi xed to "Automatic" in the Setup menu.
1
(➡ 90)
"Unit's Display" is changed to "Bright" in the Setup menu.
2
It is possible to startup and start recording within several
3
seconds.
– Depending on the type of TV or the connected terminal,
it may take time to display the screen.
After Power Save setting is complete, TV Aspect setting
screen appears.
4
Press [ e , r ] to select the TV aspect
and press [OK].
TV Aspect
16:9 WIDE TV
16:9
4:3 TV
Pan & Scan
Letterbox
16:9:
When connected to a 16:9 widescreen television
Pan&Scan:
When connected to a 4:3 aspect television,
side picture is trimmed for 16:9 picture. The
"Pan&Scan" setting may not work and the
pictures may be shown in the letterbox style
depending on the content.
Letterbox:
When connected to a 4:3 aspect television,
16:9 picture is shown in the letterbox style
(➡ 119).
When television picture appears, set up is complete.
To stop partway
Press [RETURN ].
■ To confi rm that stations have been tuned
correctly (➡ 85, DVB Channel List)
■ To restart set up (➡ 86, Auto Tuning)
■ Download from TV
If this unit is connected to a Panasonic TV (VIERA) supporting
HDAVI Control 3 or later via an HDMI cable, then the setting
information on the TV is acquired by this unit when the unit is
turned on for the fi rst time. Please proceed to the following steps.
Download from TV
After Download from TV is complete, Power Save setting
screen appears.
Press [ e , r ] to select "On" or "Off" and press [OK].
Power Save
On
Off
When television picture appears, set up is complete.
To stop partway
Press [RETURN ].
Note
Acquisition of the setting information is not supported by all
Off
2
Panasonic TVs (VIERA).
The acquisition may take some time depending on the VIERA
setting information.
3
OK
RETURN
Download in progress. Please wait.
RETURN : to cancel
RETURN
On: Minimises standby power consumption,
disables Quick Start function. Unit's Display
is set to "Automatic".
Off: Enables Quick Start function.
OK
RETURN
Hide quick links:
Advertisement
Table of Contents
