Download Print this page

Assembly Instructions - Kärcher HD 2.3/24 P / CD-23243 Operator's Manual

Hide thumbs

Advertisement

Spray
Safety
Latch
High Pressure
Hose
STEP 1: Attach the high pressure
hose to the spray gun using teflon
tape on hose threads.
Cold
Water
Source
garden
Hose
STEP 3: Connect garden hose to
the cold water source.
Before installing nozzle, turn on wa-
ter supply and run machine allowing
water to flush through the system
until clear.

ASSEMbLy INSTRUCTIONS

gun
Nozzle
Extension
STEP 2: Attach nozzle extension
to spray gun/wand. Tighten both
by hand.
Coupler Collar
STEP 5: Connect the high pressure
hose to the pump discharge fitting.
Push coupler collar forward until
secure.
9.800-087.0 • Rev. 10/09
Pump
Water
Spray gun/Wand
Inlet
STEP 3: Connect the garden hose
to pump water inlet. Inspect inlets.
CAUTION: Do not run the pump
without water or pump damage
will result.
Pressure
Pump
Nozzle
Discharge
fitting
High
Pressure
Hose
STEP 6: Pull the spring-loaded
collar of the wand coupler back
to insert your choice of pressure
nozzle. Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
garden
Hose
Wand
Coupler
Coupler
Collar
7

Advertisement

loading