AC mains supply, the voltage is as indicated on the label of the AC-DC adaptor. a. Connect the DC plug of the AC-DC adaptor to the 12V(*LT-15KLF/17FLF MODEL) or 15V(*LT-20FLF MODEL) socket of the set. b. Connect the AC-DC adaptor and its power cord.
Page 5
Warnings Service Never remove the back cover of the TV, this can expose you to high voltage and other hazards. If the TV does not operate properly, unplug it and call your dealer. Connect the antenna cable to the connection marked Ant. (on the rear). For best reception, use an outdoor antenna.
Contents Before operating the set, please read this manual carefully. Warnings Contents Supplied Accessories Controls Controller of panel Remote controller Basic Operation Turning the TV On and Off Programme selection Volume adjustment Q.View Sound mute function On screen Language selection On Screen Menus and Displays Setting up TV Programme 12~14...
3. Remote controller MENU TV/AV SLEEP Q.VIEW I/II LIST PC/ * ARC/ * TEXT SIZE HOLD INDEX UPDATE TIME REVEAL 6. PC IN cable 5. Owner’s manual LCD Color TV/Monitor Owner's Manual LT-15KLF/LT-17FLF/LT-20FLF Model : 7. PC Audio IN cable (*LT-15KLF/17FLF MODEL)
( * LT-17FLF/20FLF MODEL) ( * LT-15KLF/17FLF MODEL) ( * LT-20FLF MODEL) 1. DC12V IN (*LT-15KLF/17FLF MODEL) / DC 15V IN (*LT-20FLF MODEL) 2. PC/DTV INPUT 3. PC AUDIO IN (*LT-15KLF/17FLF MODEL) Connect the audio cable from the PC AUDIO IN of the set.
Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the side panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. POWER Turns the TV on from standby or off to standby mode.
Controls 12. VOL (Volume Up/Down) Adjusts the sound level. Adjusts menu settings. 13. PC/ * Selects the PC mode. 14. PSM (Picture Status Memory) Recalls your preferred picture setting 15. SSM (Sound Status Memory) Recalls your preferred sound setting MENU TV/AV 16.
Basic Operation Turning the TV On and Off Standby Setup: The AC-DC adapter and the AC power cord must be set up and connected to have the TV in standby mode ready to be turned on. Press the ON/OFF button on the side or front panel of the TV to go into standby mode.
On Screen Menus and Displays Equalizer 1. Press the MENU button to display main menu. Flat 2. Press the PR button to select menus-Picture, Music Sound, Special, Setup. Movie 3. Adjust each menu with the VOL button. Speech User 4. Press the MENU button to return to preceding 0.1 0.5 1.5 5.0 10KHz menu.
Setting up TV Programme Once you have preset the programmes, you will be able to Auto Programme use the PR or NUMBER buttons to scan the programmes you programmed. Programmes can be tuned using automatic or manual System modes. Start Auto Programme All programmes that can be received are stored by this Position :...
Setting up TV Programme Manual Programme Manual Programme Manual Programme lets you manually tune and arrange Programme the programmes in whatever order you desire. Also you Channel can assign a programme name with 5 characters to each Table V/UHF System programme number.
Setting up TV Programme Programme Edit Programme Edit This function enables you to delete or skip the stored P00 ----- P05 ----- programmes. P01 ----- P06 ----- P02 ----- P07 ----- Also you can move some programmes to other P03 ----- P08 ----- programme numbers or insert a blank programme data P04 ----- P09 ----- into the selected programme number.
Picture Control You can adjust picture Contrast, Brightness, Colour, Sharpness and Tint(only in NTSC mode) to the levels you prefer. Picture Manual Picture Control Contrast 1. Press the MENU button. Brightness Colour 2. Select the Picture menu. Sharpness 3. Press the PR button select a picture item.
Sound Control You can select your preferred sound setting; Flat, Music, Sound Movie or Speech. You can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, Equalizer the set automatically keeps on an equal volume level even Balance if you change programmes.
Sound Control Auto Sound Control * The sound Flat, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed. SSM (Sound Status Memory) 1. Press the SSM button. 2. Press the SSM button repeatedly to select. Each press of the button changes the screen display as below.
Other functions You can control other functions; Clock, Blue Back, Auto Special Sleep, Childlock, Radio and ARC(*Only LT-17FLF MODEL) menu. Clock Blue Back Auto Sleep Childlock Clock Radio Setting the clock is necessary in order to use the various ARC* 16:9 timer features of the TV.
Other functions Auto Sleep If you select Auto Sleep On the set will automatically switch itself to standby mode approximately ten minutes after a TV Channel stops broadcasting. 1. Press the MENU button. 2. Select the Special menu. 3. Press the PR button to select Auto Sleep.
Radio Control This function is possible only when the set is in Radio mode.(Radio mode is displayed when the Setting for special menu is radio On.) Radio Setup Mode Auto 1. Use TV/AV button on remote controller to select Frequency 87.50 MHz Radio mode.
TELETEXT TEXT On/Off 1. Press TEXT button once, displays the Teletext pages. If you press the TEXT button twice, the teletext pages and the TV picture are concurrently displayed on both sides of the screen. 2. Press MIX button once more, displays the Teletext pages superimposed on the TV picture.
TELETEXT Special TELETEXT functions MENU Functions TEXT Changes Teletext mode Selects double height text. Press this button to enlarge the top half of the page. SIZE Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. Stops the automatic page change, which will occur if a Teletext page consists of 2 or more sub pages.
2. Connect the antenna cable to the antenna in jack on the VCR. 3. Press the TV/AV button to select Antenna Input source. 4. Press the PLAY button on the VCR. (*LT-15KLF/17FLF MODEL) (*LT-20FLF MODEL) SCART jack 1. Connect the Video outputs(RGB) on a DVD to the SCART on the TV.
S-VIDEO L(MONO) R S-VIDEO VCR S-VIDEO VCR (*LT-15KLF/17FLF MODEL) (*LT-20FLF MODEL) Headphone jack Insert the headphone plug to the headphone jack on the TV. You can listen to the sound through the headphone; no sound from the speaker on the TV. To adjust the headphone volume, press the VOL button.
Connecting the PC as a monitor This function is possible only when the set is in PC mode. MENU Use the TV/AV button on remote controller. Picture Picture adjustment Sound H/V Position You can adjust picture Contrast, Brightness, Auto Temperature, Clock, Phase and ARC(*Only LT-17FLF Reset MODEL) as you prefer.
Connecting the PC as a monitor Sound adjustment Sound 1. Press the MENU button. Equalizer 2. Select the Sound menu. Balance 3. Press the PR button to select the desired sound item; Equalizer, Balance, AVL, Surround or Surround Sound Mode Sound Mode.
Connecting the PC as a monitor Position Adjustment H/V Position This function is to adjust picture to left/right and up/down as you prefer. H-Position V-Position 1. Press the MENU button. 2. Select the H/V Position menu. Position : Adjust : Back : MENU Exit : TV/AV 3.
Page 29
Connecting the PC as a monitor PC/DTV INPUT(*LT-15KLF/17FLF MODEL) 1. Connect the PC IN cable (D-sub jack) from the monitor output socket of the PC to the PC/DTV input socket of the set. 2. Connect the PC Audio IN cable from the PC to the PC AUDIO IN of the set.
Troubleshooting Problem Check item • Insert the AC power cord plug securely in AC power outlet. No picture on screen and no sound • Make sure the remote control is not in the standby from speakers mode (The POWER/Standby indicator is red.) •...
Need help?
Do you have a question about the LT-15KLF and is the answer not in the manual?
Questions and answers