Fcc And Industry Canada Compliance - Siemens optiPoint 500 Quick Reference Manual

FCC and Industry
Canada Compliance
This section describes the requirements for compliance with
Federal Communications Commission (FCC) Rules and
Industry Canada CS-03 standard.
FCC Certification and
Requirements
The following paragraphs describe requirements and
information based on FCC rules.
Service
If you experience problem with the Siemens optiPoint 500
telephone, contact Siemens customer support at 1-800-835-
7656 for information on service and repairs. The telephone
company can ask you to disconnect the equipment from the
network until the problem is corrected or until you are sure
that the equipment is not malfunctioning.
FCC Rules, Part 15
The Siemens optiPoint 500 telephone has been tested and
complied with the limits for a class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction manual, can cause harmful interference to
radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference
in the user's expense.
36 optiPoint 500 Display Phones