Honeywell IT3800 Quick Start Manual page 4

1
IT3800 Linear Imager
Connecting the Scanner - USB
1. Turn off power before
connecting the scan-
ner.
2. Connect the cable's
modular connector to
the scanner.
3. Connect the USB
connector to the PC.
4. Once the scanner is fully connected, power up the computer.
Connecting the Scanner - Keyboard Wedge
1. Turn off power before
connecting the scanner.
2. Remove the keyboard
connector from the PC.
3. Connect the cable's
modular connector to
the scanner.
4. Connect the male
connector to the
keyboard port in the PC
and the female connector to the keyboard cable. You may need to use the
Din/Mini Din adapter (included) to match your keyboard connectors.
Connecting the Scanner - Serial (RS-232)
1. Turn off power before
connecting the scanner.
2. Remove the keyboard
connector from the PC.
3. Connect the cable's
modular connector to the
scanner.
4. Connect the DB9
connector to the serial
port of the PC.
5. Connect the power stealer cable to the keyboard port in the PC. (This cable
powers only the IT3800.)
IT3800 Quick Start Guide
2
3
3
3
2
4
6
5
4
1 - 1