TVNideo Button -
Press the TVNIDEO button
to select desired input.
The MULTI button can be programmed to operate up
to 6 Remote function buttons at the same time.
For Example: TV
brands) can be operated at the same
First program the Remote for the selected VCR
Confirm that the Remote
Control is compatible
2. Face the Remote Control transmitter away from all
equipment remote sensors.
Press the Remote TV POWER button and the
Signal connected to:
INPUT 1 JACKS
TV or CABLE
R-Tune (Rapid Tune) Button -
R-TUNE (RAPID TUNE) button to instantly switch
between the last two channels selected (without any On
Screen display being activated).
Recall Button -
Press the RECALL button to
• Audio Mode status
• CH number or Video Input selected
• Sleep Timer status
• Clock time
• Channel Caption (Station Identifier)
You can also program the MULTI button to perform
most individual Remote Control button functions.
Buttons which continuously perform a function as
long as pressed (Volume Up/Down, Channel
Up/Down, etc.) cannot be programmed. Only those
buttons which perform a function when initially
Mute, Direct Channel
etc.) can be programmed.
To delete entered functions - Press the Remote
TV POWER and MULTI buttons simultaneously.
Now you can enter from one to six different Remote
Press a maximum of 6 Function buttons on the
Each button you press is equal to one function. If six
remote button functions are
all will register
in the MULTI button memory in the sequence
entered. When less than
press the MULTI button to end the
more than 30 seconds
another button will also end the
The following is an example of Remote functions
that can be programmed into the MULTI button.
TV Power -
TV ON and OFF.
VCR Power - For
VCR ON and OFF
programming it's Infra-red
Both can be turned ON
OFF with one press of the
Press Button Again
. . ,,'\. _