Panasonic Color Television Operating Instructions Manual page 33

S-Video Connection
VCR or VIDEO DISC
0
L
j
TO AUDIO
~
AMP
0
R
o
TERMINALS ON BACK OF RECEIVER
C·S-VIDEO
VCR S-VIDEO (VC)
CONNECTOR OPTIONAL
S-VIDEOC· :
VIDEO OUT0
I
INPUT-1--2
TERMINALS ON
BACK OF VCR
Operation
1. Connect S-Video (YC) connector to S-Video Terminals.
2. Make connections to Land R Input 1 Audio jacks.
3. Select Video1 mode by pressing the TVNIDEO button (or refer to the Input Selection Menu) .
4. Operate optional equipment (VCR-VDP) as instructed in Optional Equipment manual.
NOTE:
• You must select the same VIDEO Mode that the equipment is connected to.
• Connection of optional S-VIDEO jack automatically disconnects the Normal Video Input 1 jack.
-33-