Download Print this page

Controls And Functions - Black & Decker 200 WATT Instruction Manual

Vehicle power system 200 watt power inverter with usb charging port
Hide thumbs

Advertisement

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR THE 200 WATT POWER
INVERTER MODEL PI200AB.
WARNING: TO REDUCE THE RISK OF INJURY:
• Follow these instructions and those published by battery manfacturer and the manufacturer of any equipment
you intend to use with this unit. Review cautionary markings on these products and on engine.
INTRODUCTION
Thank you for purchasing the PI200AB 200 Watt Power Inverter with USB Charging Port. This inverter can be
used to operate personal electronics such as: laptop computers, digital/video cameras, MP3 players, cell
phones, PDAs, and more. It can also be used to recharge 110/120 volt AC devices that have an appropriate
recharging adapter with a standard North American two- or three-prong plug. Please read this Instruction
Manual carefully before use to ensure optimum performance and to avoid damage to this product.
FEATURES
The front panel provides three LED indicators. The green LED indicates power and proper operation of the
inverter. The AC and USB outlets are ready to use. The red LED indicates inverter shutdown from an over-load
or over-temperature fault and the yellow LED indicates an input fault. (If the red or yellow Fault LED Indicator
lights, refer to the Troubleshooting Section of this Instruction Manual.)
The Power Pushbutton turns the inverter ON and OFF. It can also be used to force reset of inverter circuits by
pressing it OFF (no LEDs are lit), then back ON again.
AC power is supplied through a standard North American three-prong type outlet. The outlet can accommodate
either two- or three-pin AC plugs. Power may also be supplied through the 12 volt DC outlet.

Controls and Functions

OUTPUT FAULT LED
INDICATOR
(ON/OFF) POWER PUSHBUTTON
BATTERY CLIPS
(WITH CABLES)
SAVE THESE INSTRUCTIONS
POWER LED
INDICATOR
INPUT FAULT LED
INDICATOR
DC ACCESSORY
OUTLET PLUG
HIGH-SPEED COOLING FAN
(BLACK) NEGATIVE
CABLE POST
115 VOLT AC OUTLET
(WITH TETHERED
COVER)
TETHERED COVER)
3
BACK OF UNIT
(RED) POSITIVE
CABLE POST
12 VOLT DC
OUTLET
(WITH TETHERED
COVER)
USB CHARGING
PORT (WITH

Hide quick links:

Advertisement

loading

  Related Manuals for Black & Decker 200 WATT

  Related Content for Black & Decker 200 WATT

This manual is also suitable for:

Pi200ab