Table of Contents
Advertisement
h t tp: / / j d wx z l w . 5 d 6 d . c om / ? f r om u s e r= S N v Û ~ ô O î
Smart Help
After returning to MAIN CONTROLS . . .
...to continue to ADJUST SIDE ANGLES, start with step 5 under
ADJUST SIDE ANGLES and follow the directions.
...to exit completely, press the
button twice.
...to adjust only the BALANCED pincushion, follow steps 1 - 4 above,
then press the
button, and follow steps 7 - 9.
...to adjust only the PARALLELOGRAM, follow steps 1 - 4 above, then
press the
button, and follow steps 7 -9
ADJUST SIDE ANGLES
ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust
two of the five preset options. These two options are TRAPEZOID and
PARALLELOGRAM. Note: use these features only when the picture is
not square.
1) Press the
button on the monitor. The MAIN CONTROLS window
appears.
2) Press the
button until ADJUST SHAPE is highlighted.
3) Press the
button. The ADJUST SHAPE window appears. ADJUST
SIDE CURVE should be highlighted.
4) Press the
button to highlight ADJUST SIDE ANGLES.
5) Press the
button. The SIDE ANGLES window appears.
TRAPEZOID should be highlighted.
6) To adjust the trapezoid, press the
SHAPE window.
Back
[ ¶ u 5 ~ ô O î • D e ™•Q ÿ Q M •9N •} T y Í ~ ô O î • D e ™
OSD Adjustments
or
button.
7) When the trapezoid is adjusted, press the
PARALLELOGRAM or press the
8) To adjust the parallelogram, press the
9) When the parallelogram is adjusted, press the
the ADJUST SHAPE window. BACK TO MAIN WINDOWS will be
highlighted.
10) Press the
button to return to the MAIN CONTROLS window, or
press the
button until ROTATE IMAGE is highlighted.
Smart Help
After returning to MAIN CONTROLS . . .
...to continue to ROTATE IMAGE, start with step 5 under ROTATE
IMAGE and follow the directions.
...to exit completely, press the
button twice.
...to adjust only the PARALLELOGRAM, follow steps 1 - 4 above, then
press the
button, and follow steps 7 -9
ROTATE IMAGE (Not available in all models)
ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of
the five preset options. These two options are PINCUSHION and
BALANCED pincushion. Note: use this feature only when the picture is
not square.
1) Press the
button on the monitor. The MAIN CONTROLS window
appears.
2) Press the
button until ADJUST SHAPE is highlighted.
3) Press the
button. The ADJUST SHAPE window appears. ADJUST
SIDE CURVE should be highlighted.
4) Press the
arrow until ROTATE IMAGE is highlighted.
9
107S2 CM23 GSIII
9
Go to cover page
button to highlight
button to return to the ADJUST
or
button.
button to return to
Forward
Advertisement
Table of Contents
