Copying Sound Files To Laptop Computer - Panasonic AG-HMC150 Basic Instructions

Screen Display (when in record ready):
BWF 24 / 48K
•|| 00:00:00
"""""""""""""""^"""""
EXT
UNCSA1_0001.wav
What this means is the files are 24 bit/48k broadcast wave files, we are using the MONO EXTernal
line input, and the file about to be recorded is called UNCSA1_0001.wav. We are in record-ready
with the file length counter reset to 00:00:00 (hrs:min:sec). The – db is the peak level of input. The
lowcut, off and effect are not being used.
To copy files to your laptop:
Turn unit OFF
• Plug the USB transfer cable between the unit and your laptop (replacing the power USB cable)
• Turn unit ON (select STORAGE by using +/- buttons, then Enter)
• When SD card mounts, copy files from the unit's MUSIC folder to an appropriate folder on your
• laptop
• After copying, drag SD card image to trash (un-mounting) and re-plug USB power supply cable
• As a safety, copy your audio files from your laptop to a USB jump drive
• See "Quick Formatting SD card" on the next page
MONO
lowcut
off
effect
--db
16