Periodic Maintenance Procedures
Clean the threads [A] of cylinder unit and base valve as-
Replace the O-rings [A] on the base valve assembly and
cylinder unit with new ones.
Apply specified fork oil to the O-rings on the base valve
With the piston rod in fully compressed position, pour the
specified amount of fork oil [A] into the cylinder unit [C].
Suspension Oil - KHL15-11 (1L): 44091-0020
KHL15-11 (4L): 44091-0021
Cylinder Unit Oil Amount: 343 ml (11.6 US oz.)
Plug the two oil holes [B] on the cylinder unit with fingers
until the base valve assembly is installed.
Pump [A] the piston rod [B] slowly several times to expel
PERIODIC MAINTENANCE 2-61