2-52 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Drain the fork oil [A] from the cylinder unit [B] by pumping
the piston rod several times.
Hold the front fork at the inverted position for more than
20 minutes to allow the fork oil to fully drain.
Clean the threads [A] of cylinder unit and base valve as-
Replace the O-rings [A] on the base valve assembly with
Apply specified fork oil to the O-rings on the base valve
With the piston rod in fully compressed position, pour the
specified amount of fork oil [A] into the cylinder unit.
Suspension Oil - KHL15-10 (1L): 44091-0004
KHL15-10 (4L): 44091-0013
Cylinder Unit Oil Amount: 198 ml (6.69 US oz.)
Plug the two oil holes [B] on the cylinder unit with fingers
until the base valve assembly is installed.