Cable, Wire, and Hose Routing
1. Viewed A
3. Spark Plug Cap
4. Viewed B
5. Run the magneto lead under the claw of the holder.
6. Magneto Lead
7. Viewed C
8. Radiator Overflow Hose
9. Run the fuel pump lead over the fuel hose and between the fuel hose and frame.
10. Paint Mark
11. Tighten the band with the 5 to 7 notches.
12. Face the claw portion leftward.
13. Align the white mark on the breather hose and embossed mark.
14. Clamp (Hold the radiator overflow hose and the gear position switch lead.)
15. Gear Position Switch Lead
16. Clamp (Hold the gear position switch lead.)
17. Run the magneto lead under the clutch cable.