The ignition system produces extremely high volt-
age. Do not touch the spark plug, ignition coil or ig-
nition coil lead while the engine is running, or you
could receive a severe electrical shock.
Ignition Coil Removal
Fuel Tank (see Fuel Tank Removal in the Fuel System
Capacitor (see Capacitor Removal)
Disconnect the primary lead connector [A].
Pull off the spark plug cap [B] .
Capacitor Bracket [B]
Ignition Coil Bolts [A]
Ignition Coil [B]
Ignition Coil Installation
Run the leads according to the Cable, Wire, and Hose
Routing section in the Appendix chapter.
Ignition Coil [A]
Ignition Coil Ground Lead [B]
Frame Ground 2 Lead [C]
Torque - Ignition Coil Bolts [D]: 9.8 N·m (1.0 kgf·m, 87 in·lb)
Connect the primary lead connector.
Install the capacitor bracket and tighten the bolts.
ELECTRICAL SYSTEM 16-23