Stator Coil Installation
Apply a non-permanent locking agent to the threads of
the stator coil bolts.
Install the stator coil and crankshaft sensor as a set.
Torque - Stator Coil Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb)
Install the holder [A] and tighten the crankshaft sensor
Hold the magneto lead with the guide [B] of the wiring
Torque - Crankshaft Sensor Bolts: 7.0 N·m (0.71 kgf·m, 62
Using a high flash-point solvent, clean off any oil or dirt
that may be on the silicone sealant coating area. Dry
them with a clean cloth.
Apply silicone sealant to the circumference of the mag-
neto lead grommet [C], and fit the grommet into the notch
of the cover securely.
Sealant - Liquid Gasket, TB1211F: 92104-0004
Install the magneto cover (see Magneto Cover Installa-
ELECTRICAL SYSTEM 16-15