For the right footpeg removal, remove the brake pedal
assy (see Right Engine Cover Removal in the Clutch
Cotter Pin [A]
Pivot Pin [C]
Footpeg Bracket Bolt [F]
Footpeg Bracket [G]
The footpeg can be adjusted in two positions, refer to
the Footpeg Height Adjustment.
Replace the cotter pin with a new one.
Apply a non-permanent locking agent to the footpeg
bracket bolts [A].
Install the footpeg bracket [B], and tighten the bolts.
Torque - Footpeg Bracket Bolt (Upper): 34 N·m (3.5 kgf·m,
Footpeg Bracket Bolt (Lower): 16.5 N·m (1.68
kgf·m, 12.2 ft·lb)
Apply grease to the pivot pin [C].
Install the footpeg [D], spring [E] and pivot pin.
Insert the pivot pin from upper side.
Install the washer [F] and new cotter pin [G].
Bend the longer side [A] of the cotter pin as shown in the