Refer to the Frame Inspection in the Periodic Mainte-
Rear Frame Removal
Seat (see Seat Removal)
Side Covers (see Side Cover Removal)
Muffler Body (see Muffler Body Removal in the Engine
Top End chapter)
Rear Fender (see Rear Fender Removal)
Rear Flap (see Rear Flap Removal)
Intake Air Temperature Sensor Connector [A]
Loosen the air cleaner duct clamp screw [A].
Remove the rear frame mounting bolts [A] on both sides.
Take off the rear frame [B] together with the air cleaner
Separate the air cleaner duct from the throttle body assy.
Take care not to damage the frame and rear shock ab-
sorber with the air cleaner duct clamp.
Rear Frame Installation
Fit the claw [A] of the clamp to the groove [B] of the air
Install the rear frame.
Insert the duct onto the throttle body assy.
Torque - Rear Frame Mounting Bolts: 34 N·m (3.5 kgf·m, 25
Tighten the air cleaner duct clamp screw.
Install the removed parts (see appropriate chapters).