Rear Shock Absorber
Hold the lower of the piston rod assembly in a vise with
soft jaws or a heavy cloth.
Remove the piston rod locknut [A] and washers for the
threads length adjustment.
Discard the piston rod locknut.
Remove the piston assembly [A] as it is.
Be careful not to disassemble it.
Stick a suitable rod into the piston assembly and leave it
until being reinstalled.
Oil Seal Assembly [A]
Damper Holder [C]
Inspect the piston rod sliding surface [A].
If the sliding surface is scratches or distortion, replace the
piston rod assembly.