Install the retaining ring to the outer tube.
Push the dust seal into the outer tube, and put the spring
band on the dust seal.
Pour the fork oil (see Front Fork Oil Change in the Periodic
Adjuster Assembly Inspection
Inspect the adjuster assembly [A] and push rod [B] for
If they are damaged, replace them with new ones.
Replace the gasket [C] and O-ring [D] on the adjuster as-
sembly with new ones.
Base Valve Assembly Inspection
Inspect the threads portion [A] and spring [B] of base
valve assembly [C] for damage.
If they are damaged, replace base valve assembly with
Replace the O-rings [D] with new ones.
Inspect the threads portion [A] of base valve assembly [B]
If they are damaged, replace base valve assembly with a
Replace the O-rings [C] with new ones.
Cylinder Unit Inspection
Inspect the piston rod [B] of cylinder unit [A] for scratches
If it has scratches or is bent, replace cylinder unit with a