Brake fluid quickly ruins painted or plastic sur-
faces; any spilled fluid should be completely
washed up immediately.
Front Master Cylinder Removal
Remove the banjo bolt [A] to disconnect the brake hose
upper end [B] from the master cylinder [C].
When removing the brake hose, temporarily secure the
end of the brake hose to some high place to keep fluid
loss to a minimum.
Remove the clamp bolts [A], and take off the master cylin-
der [B] as an assembly with the brake lever.
Front Master Cylinder Installation
Install the master cylinder [A] position as shown in the
185 mm (7.28 in.) [B]
Horizontal Line of Frame [C]
Horizontal Line of Cap Surface [E]