Kick Pedal Assy Removal
Kick Pedal Bolt [A] and Washer
Kick Pedal Assy [B]
Kick Pedal Assy Installation
Install the kick pedal assy.
Put the pedal end [A] near the cylinder head mating sur-
Apply a non-permanent locking agent to the threads of
the kick pedal bolt.
Install the washer, and tighten the kick pedal bolt.
Torque - Kick Pedal Bolt: 25 N·m (2.5 kgf·m, 18 ft·lb)
Kick Pedal Assy Disassembly
Remove the kick pedal assy (see Kick Pedal Assy Re-
Plug Screw [A]
Steel Ball [C]
Detent Screw [D]
Oil Seal [F]
Kick Pedal Assy Assembly
Replace the oil seal [A], plug screw [B] and detent screw
Apply grease to the steel ball, oil seal lip, spring, and the
sliding portion of the pedal.
Steel Ball [E]
Tighten the detent screw and plug screw.
After tightening the two screws, stake them with a punch.