8-8 ENGINE REMOVAL/INSTALLATION
Install the removed parts (see appropriate chapters).
Run the cables, hoses, and leads according to the Cable,
Wire and Hose Routing section in the Appendix chapter.
Engine Oil (see Engine Oil Change in the Periodic Main-
Coolant (see Coolant Filling in the Cooling System chap-
Throttle Cables (see Throttle Grip (Throttle Cable) Free
Play Adjustment in the Periodic Maintenance chapter)
Clutch Cable (see Clutch Operation Inspection in the Pe-
riodic Maintenance chapter)
Drive Chain (see Drive Chain Slack Adjustment in the
Periodic Maintenance chapter)
Idle Speed (see Idle Speed Adjustment in the Periodic
Check the brake effectiveness.
After servicing, it takes several applications of the
brake lever before the brake pads contact the disc,
which could result in increased stopping distance
and cause an accident resulting in injury or death.
Do not attempt to ride the motorcycle until a firm
brake lever is obtained by pumping the lever until
the pads are against the disc.