Cylinder Head Removal
Fuel Tank (see Fuel Tank Removal in the Fuel System
Cylinder Head Cover (see Cylinder Head Cover Re-
Camshafts (see Camshaft Removal)
Exhaust Pipe (see Exhaust Pipe Removal)
Ignition Coil (see Ignition Coil Removal in the Electrical
Upper Engine Bracket [A] (Both Sides)
Cylinder Head Bolts (M6) [B]
Cylinder Bolt [C]
Throttle Body Assy Clamp Screw [D]
Water Hose Clamp Screw [A] (Loosen)
Water Hose [B]
Remove the cylinder head bolts (M10) [A].
Pull the throttle body assy off the throttle body assy holder.
Remove the cylinder head [A].
When do not remove the cylinder head easily, tap lightly
up with a plastic mallet [B] to separate the cylinder head
from the cylinder.
ENGINE TOP END 5-23