Throttle Body Assy
Disconnect the throttle sensor connector [A].
Intake Air Pressure Sensor Connector [A]
Throttle Sensor Connector [B]
Fuel Injector Connector [C]
Loosen the clamp screw [A].
Take the throttle body assy [A] off the engine as shown in
Remove the throttle cable lower ends (see Throttle Cable
Throttle Body Assy Installation
Install the throttle body assy.
Engage the projection [A] and the hollow [B].
Install the removed parts (see appropriate chapters).
For easily starting the engine, connect the 12 V battery
to the main harness (see Self-diagnosis Procedures).
When the battery is connected, the fuel pump is driven
and the pressure of the fuel line increases.
FUEL SYSTEM (DFI) 3-75