3-32 FUEL SYSTEM (DFI)
Throttle Sensor (Service Code 11)
Throttle Sensor Screw [A]
Throttle Sensor [B]
Apply engine oil to the new O-ring, and install it to the new
Engage the inner rotor groove [A] with the throttle shaft
Insert the throttle sensor [A] into the throttle body.
Set the throttle sensor to the throttle body assy as shown
in the figure.
Turn the throttle sensor counterclockwise [B] until the
mounting holes align.
Tighten the throttle sensor screw lightly.
Connect the measuring adapter [A] between the main har-
ness [B] and the throttle sensor [C].
Special Tool - Measuring Adapter: 57001-1700
Connect a digital meter [D] to the measuring adapter
Throttle Sensor Output Voltage
Connections to Adapter:
Digital Meter (+) → W (sensor Y) lead
Digital Meter (–) → BK (sensor BK) lead
Refer to the Self-diagnosis Procedures, connect the 12 V
battery to the main harness.