2-78 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Cables: Lubricate with Rust Inhibitor.
Throttle Inner Cables
Clutch Inner Cable
Pivots: Lubricate with engine oil.
Rear Master Cylinder Joint Pin
With the cable disconnected at the both ends, the cable
should move freely [A] within the cable housing.
If cable movement is not free after lubricating, if the cable
is frayed [B], or if the cable housing is kinked [C], replace
Nut, Bolt, and Fastener Tightness Inspection
Check the tightness of the bolts and nuts listed here in
accordance with the Periodic Maintenance Chart. Also,
check to see that each cotter pin is in place and in good
For the engine fasteners, check the tightness of them
when the engine is cold (at room temperature).